specification control drawing te connectivity 300 constitutional drive menlo park, ca 94025 usa raychem title: soldersleeve* shield terminator, immersion resistant, mil-s-83519/2 unless otherwise specified dimensions are in millim eters. inches dimensions are between brackets. document no: s02-xx-r tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 16-apr-11 doc issue: 4 drawn by: m. foronda cage code: 06090 replaces: d970095 dcr number: d981342 prod. rev.: see table scale: none size: a sheet: 1 of 1 print date: 9-may-11 if this document is printed it becomes uncontrolle d. check for the latest revision. product name product dimensions cable dimensions product rev. product rev. product rev. product rev. a ? 1.75 ?b ?c h ?e ?f ?g ?d j ? 0.5 20 awg 22 awg 24 awg 26 awg (a ? 0.07) min min min max min min max (j ? 0.02) s02-01-r d s02-06-r d s02-11-r d s02-16-r d 16.5 (0.650) 1.90 (0.075) 2.65 (0.105) 8.25 (0.325) 2.65 (0.105) 0.90 (0.035) 0.50 (0.020) 1.90 (0.075) 7.5 (0.295) s02-02-r d s02-07-r d s02-12-r d s02-17-r d 16.5 (0.650) 2.65 (0.105) 3.68 (0.145) 8.25 (0.325) 3.68 (0.145) 1.40 (0.055) 0.75 (0.030) 2.65 (0.105) 7.5 (0.295) s02-03-r d s02-08-r d s02-13-r d s02-18-r d 16.5 (0.650) 4.30 (0.170) 5.08 (0.200) 8.25 (0.325) 5.08 (0.200) 2.15 (0.085) 1.25 (0.050) 4.30 (0.170) 7.5 (0.295) S02-04-R d s02-09-r d s02-14-r d s02-19-r d 19.1 (0.750) 5.95 (0.235) 6.45 (0.255) 8.25 (0.325) 6.45 (0.255) 3.30 (0.130) 1.80 (0.070) 5.95 (0.235) 7.5 (0.295) s02-05-r d s02-10-r d s02-15-r d s02-20-r d 19.1 (0.750) 7.00 (0.275) 7.60 (0.300) 8.25 (0.325) 7.60 (0.300) 4.30 (0.170) 2.50 (0.100) 7.00 (0.275) 7.5 (0.295) materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluorid e. 2. solder preform with flux and thermal indicator: solder: type sn63 per ansi-j-std-006. flux: type rol1 per ansi-j-std-004. thermal indicator: color change: violet to colo rless. 3. meltable ring: environment resistant thermoplast ic. color:blue. 4. ground lead: mil-w-22759/32-aa-90 lead gauge per table. application 1. these parts are designed to provide an environme nt resistant shield termination on cables meeting t he following criteria: dimensions: per table. jacket rating: 125 ? c. shield plating: tin or silver. jacket material: see m83519/2 or consult raychem. 2. parts are qualified to m83519/2. 3. for assembly information, refer to raychem docum ent rcps-100-70. for best results, prepare the cable as shown: * a trademark of te connectivity.
|